Description: At present, the design of the position of the pattern is in the position of the original pattern, and this design has problems. E.g: Draw a square, then "Copy + Paste", you will find the copied square, in the same position. problem: Because sometimes, when the left mouse button is pressed 1 times, it will become 2 times, which is equivalent to copying 2 times, so copying 2 times in the same position, the user will not know. Paste the location program: ◎, "copy pattern horizontal position" + "horizontal distance" (0.5cm) = "posted horizontal position" ◎, "copy pattern vertical position" + "vertical distance" (0.5cm) = "posted vertical position" ◎, moving the "Paste on the pattern" will change the "horizontal distance" and "vertical distance". 1. “Paste the pattern”, move to the left to reduce the “horizontal distance”, and move to the right to increase the “horizontal distance”. 2, "Paste the pattern", move up to reduce the "vertical distance", move down to increase the "vertical distance". 3, this function, can be arranged with the same distance, very easy to use. Note: 1. Click the left mouse button to select the pattern and the “Place Location Program” will be enabled. 2, leaving the "Paste on the pattern", will close the "post position program". Actual operation: ◎, "Copying the horizontal position of the pattern" (2cm) ◎, "Copying the vertical position of the pattern" (1cm) ◎, "horizontal distance" (0.5cm) ◎, "vertical distance" (0.5cm) step 1 Click the left mouse button to select the pattern, it will open the "post position program". Then press the "Copy" button. Step 2 Press the "Paste" button for the first time. ※, "Copying pattern horizontal position" (2cm) + "horizontal distance" (0.5cm) = "posted horizontal position" (2.5cm) ※, "Copying the vertical position of the pattern" (1cm) + "Vertical distance" (0.5cm) = "Vertical position attached" (1.5cm) Step 3 Move the first "posted pattern" to the right by 3.5cm: ◎, "Copy the horizontal position of the pattern", it will become 6cm (2.5cm + 3.5cm = 6cm). ◎, "horizontal distance" will become 4cm (0.5 cm +3.5 cm = 4 cm). Press the "Paste" button for the second time. ※, "Copying pattern horizontal position" (6cm) + "horizontal distance" (4cm) = "posted horizontal position" (10cm) ※, "Copying the vertical position of the pattern" (1.5cm) + "Vertical distance" (0.5cm) = "Vertical position attached" (2cm) Step 4 Leaving the "Paste on" will close the "Paste Location Program". Writer, Calc, Impress, Draw, Math, Base, all use this design. Reproducible: Always User Profile Reset: No Additional Info:
Created attachment 147161 [details] 1
Created attachment 147162 [details] 2
(In reply to 和尚蟹 from comment #0) > Paste the location program: > ◎, "copy pattern horizontal position" + "horizontal distance" (0.5cm) = > "posted horizontal position" > ◎, "copy pattern vertical position" + "vertical distance" (0.5cm) = "posted > vertical position" > ◎, moving the "Paste on the pattern" will change the "horizontal distance" > and "vertical distance". > 1. “Paste the pattern”, move to the left to reduce the “horizontal > distance”, and move to the right to increase the “horizontal distance”. > 2, "Paste the pattern", move up to reduce the "vertical distance", move > down to increase the "vertical distance". > 3, this function, can be arranged with the same distance, very easy to > use. > > Note: > 1. Click the left mouse button to select the pattern and the “Place Location > Program” will be enabled. > 2, leaving the "Paste on the pattern", will close the "post position > program". supplement Paste the location program: ◎, "copy pattern horizontal position" + "horizontal distance" (0.5cm) = "posted horizontal position" 1. The "Paste Pattern" will become "Copy Pattern Horizontal Position". ◎, "copy pattern vertical position" + "vertical distance" (0.5cm) = "posted vertical position" 1. "Paste the pattern" will become "copy pattern vertical position". ◎, moving the "Paste on the pattern" will change the "horizontal distance" and "vertical distance". 1. “Paste the pattern”, move to the left to reduce the “horizontal distance”, and move to the right to increase the “horizontal distance”. 2, "Paste the pattern", move up to reduce the "vertical distance", move down to increase the "vertical distance". 3, this function, can be arranged with the same distance, very easy to use. Note: 1. Click the left mouse button to select the pattern and the “Place Location Program” will be enabled. 2, leaving the "Paste on the pattern", will close the "post position program".
(In reply to 和尚蟹 from comment #0) > > E.g: > Draw a square, then "Copy + Paste", you will find the copied square, in the > same position. That the way it works with other design programs. Closing as RESOLVED NOTABUG
(In reply to Xisco Faulí from comment #4) > That the way it works with other design programs. > Closing as RESOLVED NOTABUG No, Only "posting" has nothing to do with "copying". "Paste the location program", the only change is "Paste". The copied pattern, in the same position, is also a problem. Don't you find Microsoft Office, the copied pattern won't be in the same location. Please don't turn off this post, this is a very important thing.
Paste location program At present, the design of the position of the pattern is in the position of the original pattern, and this design has problems. E.g: Draw a square, then press "Copy", then press "Paste", you will find the squares attached, in the same position. problem: Because sometimes, when the left button of the mouse is pressed 1 times, it will become 2 times, which is equivalent to 2 times, so it will be 2 times in the same position, the user will not know. Paste the location program: ◎, "copy pattern horizontal position" + "horizontal distance" (0.5cm) = "posted horizontal position" 1. The "Paste Pattern" will become "Copy Pattern Horizontal Position". ◎, "copy pattern vertical position" + "vertical distance" (0.5cm) = "posted vertical position" 1. "Paste the pattern" will become "copy pattern vertical position". ◎, moving the "paste pattern" will change the "horizontal distance" and "vertical distance". 1. “Paste the pattern”, move to the left to reduce the “horizontal distance”, and move to the right to increase the “horizontal distance”. 2, "Paste the pattern", move up to reduce the "vertical distance", move down to increase the "vertical distance". 3, this function, can be arranged with the same distance, very easy to use. Note: 1. Click the left mouse button to select the pattern and the “Place Location Program” will be enabled. 2, leaving the "Paste on the pattern", will close the "post position program". Actual operation: ◎, "Copying the horizontal position of the pattern" (2cm) ◎, "Copying the vertical position of the pattern" (1cm) ◎, "horizontal distance" (0.5cm) ◎, "vertical distance" (0.5cm) step 1 Click the left mouse button to select the pattern, it will open the "post position program". Then press the "Copy" button. Step 2 Press the "Paste" button for the first time. ※, "Copying pattern horizontal position" (2cm) + "horizontal distance" (0.5cm) = "posted horizontal position" (2.5cm) ※, "Copying the vertical position of the pattern" (1cm) + "Vertical distance" (0.5cm) = "Vertical position attached" (1.5cm) Step 3 Move the first "posted pattern" to the right by 3.5cm: ◎, "Copy the horizontal position of the pattern", it will become 6cm (2.5cm + 3.5cm = 6cm). ◎, "horizontal distance" will become 4cm (0.5 cm +3.5 cm = 4 cm). Press the "Paste" button for the second time. ※, "Copying pattern horizontal position" (6cm) + "horizontal distance" (4cm) = "posted horizontal position" (10cm) ※, "Copying the vertical position of the pattern" (1.5cm) + "Vertical distance" (0.5cm) = "Vertical position attached" (2cm) Step 4 Leaving the "Paste on" will close the "Paste Location Program". Writer, Calc, Impress, Draw, Math, Base, all use this design.
Paste location program At present, the design of the position of the pattern is in the position of the original pattern, and this design has problems. E.g: Draw a square, then press "Copy", then press "Paste", you will find the squares attached, in the same position. problem: Because sometimes, when the left button of the mouse is pressed 1 times, it will become 2 times, which is equivalent to "posting" 2 times, so "posting" 2 times in the same position, the user will not know. Paste the location program: ◎, "copy pattern horizontal position" + "horizontal distance" (0.5cm) = "posted horizontal position" 1. The "Paste Pattern" will become "Copy Pattern Horizontal Position". ◎, "copy pattern vertical position" + "vertical distance" (0.5cm) = "posted vertical position" 1. "Paste the pattern" will become "copy pattern vertical position". ◎, moving the "paste pattern" will change the "horizontal distance" and "vertical distance". 1. “Paste the pattern”, move to the left to reduce the “horizontal distance”, and move to the right to increase the “horizontal distance”. 2, "Paste the pattern", move up to reduce the "vertical distance", move down to increase the "vertical distance". 3, this function, can be arranged with the same distance, very easy to use. Note: 1. Click the left mouse button to select the pattern and the “Place Location Program” will be enabled. 2, leaving the "Paste on the pattern", will close the "post position program". Actual operation: ◎, "Copying the horizontal position of the pattern" (2cm) ◎, "Copying the vertical position of the pattern" (1cm) ◎, "horizontal distance" (0.5cm) ◎, "vertical distance" (0.5cm) step 1 Click the left mouse button to select the pattern, it will open the "post position program". Then press the "Copy" button. Step 2 Press the "Paste" button for the first time. ※, "Copying pattern horizontal position" (2cm) + "horizontal distance" (0.5cm) = "posted horizontal position" (2.5cm) ※, "Copying the vertical position of the pattern" (1cm) + "Vertical distance" (0.5cm) = "Vertical position attached" (1.5cm) Step 3 Move the first "posted pattern" to the right by 3.5cm: ◎, "Copy the horizontal position of the pattern", it will become 6cm (2.5cm + 3.5cm = 6cm). ◎, "horizontal distance" will become 4cm (0.5 cm +3.5 cm = 4 cm). Press the "Paste" button for the second time. ※, "Copying pattern horizontal position" (6cm) + "horizontal distance" (4cm) = "posted horizontal position" (10cm) ※, "Copying the vertical position of the pattern" (1.5cm) + "Vertical distance" (0.5cm) = "Vertical position attached" (2cm) Step 4 Leaving the "Paste on" will close the "Paste Location Program". Writer, Calc, Impress, Draw, Math, Base, all use this design.
(In reply to 和尚蟹 from comment #5) > (In reply to Xisco Faulí from comment #4) > > > That the way it works with other design programs. > > Closing as RESOLVED NOTABUG > > > No, > Only "posting" has nothing to do with "copying". > "Paste the location program", the only change is "Paste". > > > The copied pattern, in the same position, is also a problem. > Don't you find Microsoft Office, the copied pattern won't be in the same > location. Then, what would be your suggestion? Position 0,0 ?
(In reply to Xisco Faulí from comment #8) > Then, what would be your suggestion? Position 0,0 ? Correct Is the location of the "stick" It is to solve the following problems: Because sometimes, when the left button of the mouse is pressed 1 times, it will become 2 times, which is equivalent to "posting" 2 times, so "posting" 2 times in the same position, the user will not know. Didn't you have encountered it, press the left button of the mouse to press 1 and it will become the situation of pressing 2?
Created attachment 148466 [details] watch video
At present, the design of the position of the pattern is in the position of the original pattern, and this design has problems. E.g: Draw a square, then press "Copy", then press "Paste", you will find the "Paste" square, in the same position. problem: Because sometimes, the left mouse button "press 1 time" will become "press 2 times", which means "post" 2 times, so "post" 2 times in the same position, the user will not know . Paste the location program: ◎, "copy pattern horizontal position" + "horizontal distance" (0.5cm) = "posted horizontal position" 1. The "Paste Pattern" will become "Copy Pattern Horizontal Position". ◎, "copy pattern vertical position" + "vertical distance" (0.5cm) = "posted vertical position" 1. "Paste the pattern" will become "Copy pattern vertical position". ◎, moving the "Paste on the pattern" will change the "horizontal distance" and "vertical distance". 1. “Paste the pattern”, move to the left to reduce the “horizontal distance”, and move to the right to increase the “horizontal distance”. 2, "Paste the pattern", move up to reduce the "vertical distance", move down to increase the "vertical distance". 3, this function, can be arranged with the same distance, very easy to use. Note: 1. Click the left mouse button to select the pattern and the “Paste the location program” will be enabled. 2, leaving the "Paste on the pattern", will close the "Paste the location program". 3, this is the best "Paste the location program". 4. In "Word", this "Paste the location program" will appear only when editing the ".doc" file. When editing the ".docx" file, it has been changed to a relatively simple way. "Word" has given up this "Paste the location program". Actual operation: ◎, "Copying the horizontal position of the pattern" (2cm) ◎, "Copying the vertical position of the pattern" (1cm) ◎, "horizontal distance" (0.5cm) ◎, "vertical distance" (0.5cm) step 1 Click the left mouse button to select the pattern, and the "Paste the location program" will be enabled. Then press the "Copy" button. Step 2 Press the "Paste" button for the first time. ※, "Copying pattern horizontal position" (2cm) + "horizontal distance" (0.5cm) = "posted horizontal position" (2.5cm) ※, "Copying the vertical position of the pattern" (1cm) + "Vertical distance" (0.5cm) = "Vertical position attached" (1.5cm) Step 3 Move the first "posted pattern" to the right by 3.5cm: ◎, "Copy the horizontal position of the pattern", it will become 6cm (2.5cm + 3.5cm = 6cm). ◎, "horizontal distance" will become 4cm (0.5 cm +3.5 cm = 4 cm). Press the "Paste" button for the second time. ※, "copy pattern horizontal position" (6cm) + "horizontal distance" (4cm) = "posted horizontal position" (10cm) ※, "Copying the vertical position of the pattern" (1.5cm) + "Vertical distance" (0.5cm) = "Vertical position attached" (2cm) Step 4 Leaving the "Paste on" will close the "Paste the location program". Writer, Calc, Impress, Draw, Math, Base, all use this design.
Could you please paste the info from Help - about LibreOffice ? I have set the bug's status to 'NEEDINFO'. Please change it back to 'UNCONFIRMED' once the information has been provided
Dear 00, This bug has been in NEEDINFO status with no change for at least 6 months. Please provide the requested information as soon as possible and mark the bug as UNCONFIRMED. Due to regular bug tracker maintenance, if the bug is still in NEEDINFO status with no change in 30 days the QA team will close the bug as INSUFFICIENTDATA due to lack of needed information. For more information about our NEEDINFO policy please read the wiki located here: https://wiki.documentfoundation.org/QA/Bugzilla/Fields/Status/NEEDINFO If you have already provided the requested information, please mark the bug as UNCONFIRMED so that the QA team knows that the bug is ready to be confirmed. Thank you for helping us make LibreOffice even better for everyone! Warm Regards, QA Team MassPing-NeedInfo-Ping
Dear 00, Please read this message in its entirety before proceeding. Your bug report is being closed as INSUFFICIENTDATA due to inactivity and a lack of information which is needed in order to accurately reproduce and confirm the problem. We encourage you to retest your bug against the latest release. If the issue is still present in the latest stable release, we need the following information (please ignore any that you've already provided): a) Provide details of your system including your operating system and the latest version of LibreOffice that you have confirmed the bug to be present b) Provide easy to reproduce steps – the simpler the better c) Provide any test case(s) which will help us confirm the problem d) Provide screenshots of the problem if you think it might help e) Read all comments and provide any requested information Once all of this is done, please set the bug back to UNCONFIRMED and we will attempt to reproduce the issue. Please do not: a) respond via email b) update the version field in the bug or any of the other details on the top section of our bug tracker Warm Regards, QA Team MassPing-NeedInfo-FollowUp