See also Bug 76143

Problem Description: Many missing / wrong paper sizes in the Print Preview.
This seems to be mixed up and needs a revision.  Because of the many (from my point of view) mistakes this bug report is unfortunately very long.

1. Go to FORMAT -> PAGE -> tab PAGE
2. Change the Paper Size to Long Bond and press OK
Interim Result: It shows the correct height and width.

3. Go to FILE -> PRINT
Interim Result: The left section does not show the paper size Long Bond at the top but wrongly "Legal" and it also does not show the correct height (356mm instead of 330 mm).

4. Go to FORMAT -> PAGE -> tab PAGE
5. Change the Paper Size to Tabloid and press OK
Interim Result: For me it seems not to show the correct size (27.94cm x 41.38cm instead of 23.5 cm x 31.5 cm).  Can anybody else confirm this size difference?

6. Go to FILE -> PRINT
Interim Result: The left section seems not to show the correct height and width (279mm x 432mm instead of 235 mm x 315 mm).  See also that there is also a discrepancy to the step before 432 <> 414 mm (even if both seem to me to be not correct).

7. Go to FORMAT -> PAGE -> tab PAGE
8. Change the Paper size to B6 (JIS) and press OK
Interim Result: It shows the correct height and width.

9. Go to FILE -> PRINT
Interim Result: The left section does not show the paper size B6 (JIS) at the top and it also does not show the correct height and width (149mm x 210mm instead of 128 mm x 182 mm).

10. Go to FORMAT -> PAGE -> tab PAGE
11. Change the Paper Size to B5 (JIS) and press OK
Interim Result: It shows the correct height and width.

12. Go to FILE -> PRINT
Interim Result: The left section does not show the paper size B5 (JIS) but wrongly "Executive" at the top and it also does not show the correct height and width (184mm x 267mm instead of 182 mm x 257 mm).

13. Go to FORMAT -> PAGE -> tab PAGE
14. Change the Paper Size to B4 (JIS) and press OK
Interim Result: It shows the correct height and width.

15. Go to FILE -> PRINT
Interim Result: The left section does not show the paper size B4 (JIS) but wrongly "Legal" at the top and it also does not show the correct height and width (216mm x 356mm instead of 257 mm x 364 mm).

Note: I stop at this point, because the bug report gets to long.  I will test the other paper sizes later.

Expected Behavior:
The Print Preview should show the (correct) paper size data.