Created attachment 108254 [details] Open the document, go through the form-controls with the tabulator Open the attached file. Set the cursor in the first form-control. Press the tab-key. The cursor will jump to the third control, then to the second control. There is a tabindex set as the controls are positioned. This tabindex would work, if the first or the last control will get a different name. It doesent work with the same name. This bug has been already reported as Bug59874, but has been set by the bug-submitter as resolved-fixed without any fix. I could reproduce this with the first available LO-Version LO 3.3 and also with the last LO 4.3.3.1.
I reproduced. Win 7 64-bit Version: 4.4.0.0.alpha2+ Build ID: 6143fa5a89d9528fc11fed1e7fe96b9280d411a4 TinderBox: Win-x86@51-TDF, Branch:MASTER, Time: 2014-11-10_23:27:31
** Please read this message in its entirety before responding ** To make sure we're focusing on the bugs that affect our users today, LibreOffice QA is asking bug reporters and confirmers to retest open, confirmed bugs which have not been touched for over a year. There have been thousands of bug fixes and commits since anyone checked on this bug report. During that time, it's possible that the bug has been fixed, or the details of the problem have changed. We'd really appreciate your help in getting confirmation that the bug is still present. If you have time, please do the following: Test to see if the bug is still present on a currently supported version of LibreOffice (5.0.4 or later) https://www.libreoffice.org/download/ If the bug is present, please leave a comment that includes the version of LibreOffice and your operating system, and any changes you see in the bug behavior the bug is NOT present, please set the bug's Status field to RESOLVED-WORKSFORME and leave a short comment that includes your version of LibreOffice and Operating System Please DO NOT Update the version field Reply via email (please reply directly on the bug tracker) Set the bug's Status field to RESOLVED - FIXED (this status has a particular meaning that is not appropriate in this case) If you want to do more to help you can test to see if your issue is a REGRESSION. To do so: 1. Download and install oldest version of LibreOffice (usually 3.3 unless your bug pertains to a feature added after 3.3) http://downloadarchive.documentfoundation.org/libreoffice/old/ 2. Test your bug 3. Leave a comment with your results. 4a. If the bug was present with 3.3 - set version to "inherited from OOo"; 4b. If the bug was not present in 3.3 - add "regression" to keyword Feel free to come ask questions or to say hello in our QA chat: http://webchat.freenode.net/?channels=libreoffice-qa Thank you for your help! -- The LibreOffice QA Team This NEW Message was generated on: 2015-12-20
(In reply to QA Administrators from comment #2) > Test to see if the bug is still present on a currently supported version of > LibreOffice (5.0.4 or later) > https://www.libreoffice.org/download/ > > If the bug is present, please leave a comment that includes the version of > LibreOffice and your operating system, and any changes you see in the bug > behavior Tested with LO 5.1.0.1 on OpenSUSE 42.1 Leap 64bit rpm Linux. Bug is present, no changes in the behavior.
** Please read this message in its entirety before responding ** To make sure we're focusing on the bugs that affect our users today, LibreOffice QA is asking bug reporters and confirmers to retest open, confirmed bugs which have not been touched for over a year. There have been thousands of bug fixes and commits since anyone checked on this bug report. During that time, it's possible that the bug has been fixed, or the details of the problem have changed. We'd really appreciate your help in getting confirmation that the bug is still present. If you have time, please do the following: Test to see if the bug is still present on a currently supported version of LibreOffice (5.1.6 or 5.2.3 https://www.libreoffice.org/download/ If the bug is present, please leave a comment that includes the version of LibreOffice and your operating system, and any changes you see in the bug behavior If the bug is NOT present, please set the bug's Status field to RESOLVED-WORKSFORME and leave a short comment that includes your version of LibreOffice and Operating System Please DO NOT Update the version field Reply via email (please reply directly on the bug tracker) Set the bug's Status field to RESOLVED - FIXED (this status has a particular meaning that is not appropriate in this case) If you want to do more to help you can test to see if your issue is a REGRESSION. To do so: 1. Download and install oldest version of LibreOffice (usually 3.3 unless your bug pertains to a feature added after 3.3) http://downloadarchive.documentfoundation.org/libreoffice/old/ 2. Test your bug 3. Leave a comment with your results. 4a. If the bug was present with 3.3 - set version to "inherited from OOo"; 4b. If the bug was not present in 3.3 - add "regression" to keyword Feel free to come ask questions or to say hello in our QA chat: http://webchat.freenode.net/?channels=libreoffice-qa Thank you for helping us make LibreOffice even better for everyone! Warm Regards, QA Team MassPing-UntouchedBug-20170103
Bug still exist. Version: 5.2.4.2 Build-ID: 3d5603e1122f0f102b62521720ab13a38a4e0eb0 CPU-Threads: 4; BS-Version: Linux 4.1; UI-Render: Standard; VCL: kde4; Gebietsschema: de-DE (de_DE.UTF-8); Calc: group
This bug is a special problem for optiongroups in a form. All optionfields must get the same name if the user should only be able to select one option. So optiongroups won't work well if using tabulators in a form.
** Please read this message in its entirety before responding ** To make sure we're focusing on the bugs that affect our users today, LibreOffice QA is asking bug reporters and confirmers to retest open, confirmed bugs which have not been touched for over a year. There have been thousands of bug fixes and commits since anyone checked on this bug report. During that time, it's possible that the bug has been fixed, or the details of the problem have changed. We'd really appreciate your help in getting confirmation that the bug is still present. If you have time, please do the following: Test to see if the bug is still present with the latest version of LibreOffice from https://www.libreoffice.org/download/ If the bug is present, please leave a comment that includes the information from Help - About LibreOffice. If the bug is NOT present, please set the bug's Status field to RESOLVED-WORKSFORME and leave a comment that includes the information from Help - About LibreOffice. Please DO NOT Update the version field Reply via email (please reply directly on the bug tracker) Set the bug's Status field to RESOLVED - FIXED (this status has a particular meaning that is not appropriate in this case) If you want to do more to help you can test to see if your issue is a REGRESSION. To do so: 1. Download and install oldest version of LibreOffice (usually 3.3 unless your bug pertains to a feature added after 3.3) from http://downloadarchive.documentfoundation.org/libreoffice/old/ 2. Test your bug 3. Leave a comment with your results. 4a. If the bug was present with 3.3 - set version to 'inherited from OOo'; 4b. If the bug was not present in 3.3 - add 'regression' to keyword Feel free to come ask questions or to say hello in our QA chat: https://kiwiirc.com/nextclient/irc.freenode.net/#libreoffice-qa Thank you for helping us make LibreOffice even better for everyone! Warm Regards, QA Team MassPing-UntouchedBug
Bug still exists with LO 6.2.2.2 and OpenSUSE 15, 64bit rpm Linux.
Dear Robert Großkopf, To make sure we're focusing on the bugs that affect our users today, LibreOffice QA is asking bug reporters and confirmers to retest open, confirmed bugs which have not been touched for over a year. There have been thousands of bug fixes and commits since anyone checked on this bug report. During that time, it's possible that the bug has been fixed, or the details of the problem have changed. We'd really appreciate your help in getting confirmation that the bug is still present. If you have time, please do the following: Test to see if the bug is still present with the latest version of LibreOffice from https://www.libreoffice.org/download/ If the bug is present, please leave a comment that includes the information from Help - About LibreOffice. If the bug is NOT present, please set the bug's Status field to RESOLVED-WORKSFORME and leave a comment that includes the information from Help - About LibreOffice. Please DO NOT Update the version field Reply via email (please reply directly on the bug tracker) Set the bug's Status field to RESOLVED - FIXED (this status has a particular meaning that is not appropriate in this case) If you want to do more to help you can test to see if your issue is a REGRESSION. To do so: 1. Download and install oldest version of LibreOffice (usually 3.3 unless your bug pertains to a feature added after 3.3) from https://downloadarchive.documentfoundation.org/libreoffice/old/ 2. Test your bug 3. Leave a comment with your results. 4a. If the bug was present with 3.3 - set version to 'inherited from OOo'; 4b. If the bug was not present in 3.3 - add 'regression' to keyword Feel free to come ask questions or to say hello in our QA chat: https://kiwiirc.com/nextclient/irc.freenode.net/#libreoffice-qa Thank you for helping us make LibreOffice even better for everyone! Warm Regards, QA Team MassPing-UntouchedBug
Bug still exists with LO 7.1.2.1 and OpenSUSE 15.2, 64bit rpm Linux.
While I can confirm that the issue still exists in LibreOffice 7.1.3.2 (on OpenSUSE Leap 15.2), I would like to point out that the file attachment does not demonstrate how forms are intended to be filled in. As the LibreOffice Writer Guide points out at https://books.libreoffice.org/en/WG71/WG7118-Forms.html#toc24 [begin quote] If you plan to send this [form] out to other people to complete, you probably want to make the document read-only so that users would be able to fill in the form but not make any other changes to the document. To make the document read-only, select File > Properties, select the Security tab and enable Open file read-only. [end quote] A similar feature exists in Microsoft Word ("Restrict Editing", so the form can only be filled in, not modified). However, when a Writer form is saved in read-only mode and re-opened, the form fields are not keyboard accessible, as I have reported in bug 143818: https://bugs.documentfoundation.org/show_bug.cgi?id=143818 Probably, that bug needs to be looked into before this bug (85339) can be tested again in read-only mode.
Dear Robert Großkopf, To make sure we're focusing on the bugs that affect our users today, LibreOffice QA is asking bug reporters and confirmers to retest open, confirmed bugs which have not been touched for over a year. There have been thousands of bug fixes and commits since anyone checked on this bug report. During that time, it's possible that the bug has been fixed, or the details of the problem have changed. We'd really appreciate your help in getting confirmation that the bug is still present. If you have time, please do the following: Test to see if the bug is still present with the latest version of LibreOffice from https://www.libreoffice.org/download/ If the bug is present, please leave a comment that includes the information from Help - About LibreOffice. If the bug is NOT present, please set the bug's Status field to RESOLVED-WORKSFORME and leave a comment that includes the information from Help - About LibreOffice. Please DO NOT Update the version field Reply via email (please reply directly on the bug tracker) Set the bug's Status field to RESOLVED - FIXED (this status has a particular meaning that is not appropriate in this case) If you want to do more to help you can test to see if your issue is a REGRESSION. To do so: 1. Download and install oldest version of LibreOffice (usually 3.3 unless your bug pertains to a feature added after 3.3) from https://downloadarchive.documentfoundation.org/libreoffice/old/ 2. Test your bug 3. Leave a comment with your results. 4a. If the bug was present with 3.3 - set version to 'inherited from OOo'; 4b. If the bug was not present in 3.3 - add 'regression' to keyword Feel free to come ask questions or to say hello in our QA chat: https://web.libera.chat/?settings=#libreoffice-qa Thank you for helping us make LibreOffice even better for everyone! Warm Regards, QA Team MassPing-UntouchedBug
Bug still exists: Version: 7.6.0.2 (X86_64) / LibreOffice Community Build ID: 41d6f628ba3f046f16b5fa9fa8db8d4c2ab3b582 CPU threads: 6; OS: Linux 5.14; UI render: default; VCL: kf5 (cairo+xcb) Locale: de-DE (de_DE.UTF-8); UI: de-DE Calc: threaded